Unsere Vorteile für Sie

Zur Startseite gehen

Produktinformationen "SIKA Primer - 210 Pre-treatment 250 ml"

Order number: 48284003
Hersteller-Nr.: 425365
Versandart: Standardpaket

Sika® Primer-210 is a colourless to slightly yellowish solvent-based primer that reacts with moisture and forms a thin film (film-forming). This layer acts as a bond between the substrate and the adhesive. Sika® Primer-210 has been specially developed for the pre-treatment of bonding surfaces in combination with Sikaflex® adhesives.

  • Chemical base: Solvent-based epoxy primer
  • Colour (CQP001-1): Colourless, slightly yellowish
  • Solids content 34 %
  • Application temperature: 5 to 40 °C
  • Application instructions: Brush, felt, lint-free cloth or foam applicator
  • Coverage (depending on surface porosity): 50 ml/m2
  • Flash-off time: ≥ 15 °C = 10 minutes, < 15 °C = 30 Minuten, höchstens = 24 Stunden

Application:

Sika® Primer-210 is used to improve adhesion to various metals, such as aluminium, steel and non-ferrous metals. This primer can also be used to improve the adhesion of Sikasil® sealants and adhesives. Observe the manufacturer's recommendations before using Sika® Primer-210 on materials susceptible to stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the relevant conditions.

Application note:

The bonding surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion can be improved before applying the primer by additional pre-treatment steps such as sanding, cleaning and activating.

Processing:

Processing can be carried out using a brush, felt, a clean lint-free cloth or a foam applicator. Apply Sika® Primer-210 evenly, thinly but with sufficient coverage. Up to three days after application, Sika® Primer-210 exhibits thermoplastic behaviour; therefore, avoid higher temperatures or premature loading of the adhesive joint.
The optimum processing and surface temperature is between 15 °C and 25 °C.
Apply the primer only once. Ensure that the single application provides sufficient coverage.
Coverage and method of application depend on the nature of the substrates.
Seal the container tightly immediately after each use.

Hazard statements:

H225 : Highly flammable liquid and vapour.
H226 : Flammable liquid and vapour.
H301 : Toxic if swallowed.
H304 : May be fatal if swallowed and enters airways.
H311 : Toxic in contact with skin.
H312 : Harmful in contact with skin.
H315 : Causes skin irritation.
H317 : May cause an allergic skin reaction.
H319 : Causes serious eye irritation.
H331 : Toxic if inhaled.
H332 : Harmful if inhaled.
H335 : May cause respiratory irritation.
H336 : May cause drowsiness or dizziness.
H341 : Suspected of causing genetic defects.
H360FD : May damage fertility. May damage the unborn child.
H370 : Causes damage to organs if swallowed.
H370 : Causes damage to organs.
H372 : Causes damage to organs through prolonged or repeated exposure if swallowed.
H373 : May cause damage to organs through prolonged or repeated exposure if inhaled.
H400 : Very toxic to aquatic life.
H410 : Very toxic to aquatic life with long lasting effects.
H412 : Harmful to aquatic life with long lasting effects.

Marke: SIKA
Volumen (L): 0,25
SIKA

Sika Deutschland GmbH

Kornwestheimer Straße 103-107
70439 Stuttgart

Deutschland

info@de.sika.com