SIKA Sikaflex - 554 STP Assembly Adhesive Black 300 ml
Inhalt: 0.3 Liter (€69.87 / 1 Liter)

€12.95
Lieferzeit: 2 - 4 Werktage
Sika® Activator-205 is a solvent-based, colourless, clear adhesion promoter that reacts with moisture and leaves adhesion-active compounds on the surface. These act as a link between the substrate and primer or adhesive.
Sika® Activator-205 has been specially developed for the pre-treatment of bonding surfaces in combination with Sikaflex® and Sikasil® adhesives/sealants.
The bonding surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion can be improved before applying the activator through additional pre-treatment steps such as sanding or cleaning.
Wipe the bonding surfaces with a clean, lint-free paper wipe moistened (not wet) with Sika® Activator-205. Never immerse the paper wipe in the activator. Wipe the surface with only a clean side of the paper wipe. Change the paper wipe each time and do not moisten the same wipe twice.
Sika® Activator-205 must be used sparingly, as an excess of adhesion promoter can lead to adhesion failure. If the pre-treated area is not bonded within the maximum flash-off time, the activation process must be repeated (only possible once). The optimum processing and surface temperature is between 15 °C and 25 °C.
Consumption and type of application depend on the nature of the substrates.
Close the can tightly immediately after each use.
H225 : Highly flammable liquid and vapour.
H226 : Flammable liquid and vapour.
H315 : Causes skin irritation.
H318 : Causes serious eye damage.
H319 : Causes serious eye irritation.
H335 : May cause respiratory irritation.
H336 : May cause drowsiness or dizziness.
| Farbe: | transparent |
|---|---|
| Marke: | SIKA |
| Volumen (L): | 0,03 |

Sika Deutschland GmbH
Kornwestheimer Straße 103-107
70439 Stuttgart