Unsere Vorteile für Sie

Zur Startseite gehen

Produktinformationen "SIKA Lastomer - 710 Butyl Sealant White 310 ml"

Order number: 48284110
Hersteller-Nr.: 1344
Versandart: Standardpaket

SikaLastomer®-710 is a solvent-based, paste-like, non-sag sealant based on butyl. It cures by physical drying. The product can be used to create permanently plastic seals for joints in various industrial applications.

  • Easy application
  • Good adhesion to a wide range of substrates
  • Good ageing resistance
  • Plastic behaviour
  • Cures without heat
  • Reversible seal
  • Seal can be easily separated
  • Chemical base: Butyl
  • Density before curing (DIN 53479) approx. 1.4 kg/l
  • Application temperature +10°C to +35°C
  • Skin formation time1 approx. 10 - 20 minutes
  • Volume change (DIN 52451) approx. -12%
  • Continuous service temperature: -30°C to +80°C

Application

SikaLastomer®-710 is particularly suitable for permanently plastic seals that can be removed easily again. It is used in automotive, bus, truck and motorhome manufacturing. With minimal pre-treatment, SikaLastomer®-710 shows good adhesion to a wide range of substrates in the industrial applications listed above. This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests with original materials must be carried out under the respective conditions.

Surface preparation

The bonding surfaces must be clean, dry and free from grease, oil, dust and contaminants.
Adhesion must be checked by preliminary tests with original materials.

Application

Apply SikaLastomer®-710 with a suitable cartridge gun and avoid air pockets.
Do not apply at ambient temperatures below 10 °C or above 35 °C.

Smoothing

Joints made with SikaLastomer®-710 can be smoothed with water and soap.

Removal

On non-porous substrates, allow the sealant to cure and remove by dabbing. On porous substrates, cured SikaLastomer®-710 can only be removed mechanically.
Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Cleaner-350H) or industrial hand cleaners and water. Do not use solvents on the skin!

Overpaintability

SikaLastomer®-710 can only be overpainted with some water-based systems. Paint compatibility must be checked by preliminary tests under production conditions. As the elasticity of paints is lower than that of the sealant, paint cracks may occur in the joint area.

Hazard statements:

H226 : Flammable liquid and vapour.
H304 : May be fatal if swallowed and enters airways.
H336 : May cause drowsiness or dizziness.
Farbe: Weiß
Marke: SIKA
Volumen (L): 0,31
SIKA

Sika Deutschland GmbH

Kornwestheimer Straße 103-107
70439 Stuttgart

Deutschland

info@de.sika.com