Unsere Vorteile für Sie

Zur Startseite gehen

Produktinformationen "SIKA Sikaflex - 521 FC Adhesive and Sealant Transparent 290 ml"

Order number: 48284074
Hersteller-Nr.: 181932
Versandart: Standardpaket

Weather-resistant STP adhesive and sealant with broad adhesion range

  • Ageing and weather resistant
  • Good adhesion to a wide range of substrates without special pre-treatment
  • Isocyanate-free
  • Can be painted over
  • non-corrosive
  • Low odour
  • Chemical base: Modified polymer
  • Colour: clear, transparent
  • Curing mechanism: moisture-curing
  • Density before curing (DIN EN ISO 1183-1): approx. 1.06 kg/l
  • Sag resistance: good
  • Application temperature: 5°C to 40°C
  • Skin formation time: 30 min.
  • Continuous service temperature: -40 °C to +90 °C

Application

Sikaflex®-521 FC is a transparent, weather-resistant, one-component sealant that cures by reacting with atmospheric moisture. The product offers good adhesion to a wide range of substrates such as metals, plastics and wood. Normally, no surface pre-treatment or only a simple one is required. Sikaflex®-521 FC is suitable for permanent elastic sealing. Observe the manufacturer's recommendations before using Sikaflex®-521 FC on materials susceptible to stress cracking. Preliminary tests must be carried out with the original materials to avoid stress cracking. This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with the original materials under the relevant conditions.

Surface pre-treatment

The bonding surfaces must be clean, dry and free from grease, oil and dust. Surface pre-treatment depends on the specific nature of the substrate and is crucial for a lasting bond. Information on substrate preparation can be found in the current Sika® pre-treatment table. The information it contains is based on experience and must always be verified by preliminary tests with the original materials.

Processing

Sikaflex®-521 FC can be applied between 5 °C and 40 °C (changes in reactivity must be taken into account). The optimum temperature for the substrate and sealant is between 15 °C and 25 °C.
Apply Sikaflex®-521 FC with a suitable cartridge / foil pack gun.

Tooling

Tooling must be carried out before the sealant forms a skin. For tooling, we recommend Sika® Tooling Agent N. Other tooling agents must be checked for suitability.

Removal

Uncured Sikaflex®-521 FC can be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Cured material can only be removed mechanically. Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Handclean) or industrial hand cleaners and water. Do not use solvents on the skin!

Hazard statements:

H226 Flammable liquid and vapour.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Farbe: transparent
Marke: SIKA
Volumen (L): 0,29
SIKA

Sika Deutschland GmbH

Kornwestheimer Straße 103-107
70439 Stuttgart

Deutschland

info@de.sika.com