SIKA Replacement Nozzle Standard Version 12-Piece Set

€20.96*
UVP €22.50* (7% gespart)Auf Lager, Lieferzeit: 2 - 3 Werktage
Sikaflex®-554 is an elastic one-component STP adhesive system specially developed for bonding large components in industrial manufacturing. Sikaflex®-554 demonstrates good adhesion to a wide range of substrates with minimal pre-treatment. Sikaflex®-554 can be accelerated using the Booster and PowerCure system.
Sikaflex®-554 is suitable for joints subjected to dynamic loads. Suitable substrates include metals, particularly aluminium, metal primers, paints, sheet steel, ceramic materials and plastics. Sikaflex®-554 demonstrates good adhesion to a wide range of substrates with minimal pre-treatment.
Observe the manufacturer's recommendations before using Sikaflex®-554 on materials prone to stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracks.
This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.
The bonding surfaces must be clean, dry and free from grease, oil, dust and contaminants. Surface pre-treatment depends on the specific nature of the substrate and is crucial for a durable bond. Information on substrate pre-treatment can be found in the current Sika® Pre-treatment Table. The information contained therein is based on experience and must in all cases be verified by preliminary tests with original materials.
Sikaflex®-554 can be processed between 5 °C and 40 °C (ambient and product). Changes in reactivity and application properties must be taken into account. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Note the increase in viscosity at cool temperatures. For ease of processing, warm the adhesive to room temperature.
Smoothing must be carried out before the sealant forms a skin. For smoothing, we recommend Sika® Tooling Agent N. Other smoothing agents must be checked for suitability.
Uncured Sikaflex®-554 can be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Cured material can only be removed mechanically. Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Handclean) or industrial hand cleaners and water. Do not use solvents on the skin!
H226 : Flammable liquid and vapour.
H302 : Harmful if swallowed.
H317 : May cause an allergic skin reaction.
H319 : Causes serious eye irritation.
H332 : Harmful if inhaled.
H413 : May be harmful to aquatic life with long lasting effects.
| Farbe: | Weiß |
|---|---|
| Marke: | SIKA |
| Volumen (L): | 0,3 |

Sika Deutschland GmbH
Kornwestheimer Straße 103-107
70439 Stuttgart