VICTRON Solar Charge Controller SmartSolar MPPT 100/15
-
VICTRON SmartSolar MPPT 75/15 Solar Charge Controller €64.08 €80.96 verfügbar -
VICTRON SmartSolar MPPT 100/20 Solar Charge Controller €92.80 €101.99 verfügbar -
VICTRON SmartSolar MPPT 100/30 Solar Charge Controller €133.29 €145.00 verfügbar -
VICTRON SmartSolar MPPT 75/10 Solar Charge Controller €59.85 €74.95 verfügbar -
VICTRON Solar Charge Controller SmartSolar MPPT 100/15 €79.80 €99.95 verfügbar -
VICTRON SmartSolar MPPT 100/50 Solar Charge Controller €189.39 €234.95 verfügbar
Produktinformationen "VICTRON Solar Charge Controller SmartSolar MPPT 100/15"
SmartSolar MPPT charge controller with Bluetooth functionality
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point detection in partial shading
- Excellent efficiency
- Cooling by natural convection
- Automatic battery voltage detection
- Flexible charge algorithms
- Overheating protection and load reduction at high temperatures
- Built-in Bluetooth functionality - the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices
- Battery voltage: 12/24 V (automatic selection)
- Rated charge current: 15 A
- Nominal PV power, 12 V: 220 W
- Nominal PV power, 24 V: 440 W
- Max. short-circuit current of the solar array: 15 A
- Automatic load disconnection: Yes
- Maximum PV open-circuit voltage: 100 V
- Peak efficiency: 98%
- Self-consumption – load on, 12 V: 19 mA, 24 V: 16 mA
- Self-consumption – load off, 12 V: 10 mA, 24 V: 8 mA
- "Absorption" charge voltage: 14.4 V / 28.8 V (adjustable)
- "Float" charge voltage: 13.8 V / 27.6 V (adjustable)
- Charge algorithm: multi-stage, adaptive
- Temperature compensation: -16 mV/°C or -32 mV/°C
- Continuous/load current: 15 A
- Load disconnect at low voltage: 11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or BatteryLife algorithm
- Load reconnect after low voltage: 13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or BatteryLife algorithm
- Protection: output short circuit / over-temperature
- Operating temperature: -30 °C to +60 °C (full rated output up to 40 °C)
- Humidity: 95% non-condensing
- Data communication port: VE.Direct
- Power connections: 6 mm² / AWG10
- Protection category: (electronic components) IP43 / IP22 (connection area)
A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximises this energy yield and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains battery health and extends its service life.
The SmartSolar charge controller can even recharge a deeply discharged battery. It can operate with a battery voltage of as little as 0 volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current output of your solar (PV) modules, MPPT technology ensures that all available energy is harvested from the modules and stored. This benefit is most noticeable when the sky is partly covered and light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MPPT charger with integrated Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your system is connected to the Victron Remote Management internet portal (VRM) via a GX device, you have full access to your MPPT at any time and from anywhere. Both VictronConnect and VRM are available free of charge. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting to a GlobalLink 520.
Load output
The 'Smart Load Output' feature prevents damage caused by using "flat" batteries. You can configure the voltage at which the SmartSolar disconnects a load - this prevents excessive discharge of your batteries. And here's the clever part: the SmartSolar attempts to recharge the battery to 100% every day. If this is not possible - for example, in bad weather - it raises the disconnect voltage daily until it succeeds. We call this feature BatteryLife, as it maintains battery performance and extends battery life.
| Breite (cm): | 11,3 |
|---|---|
| Gewicht (kg): | 0,6 |
| Höhe (cm): | 10 |
| Tiefe (cm): | 5 |
| Leistung: | 220 W |
| Marke: | VICTRON ENERGY |
| Schutzklasse: | 43 |

Victron Energy B.V.
De Paal 35
NL-1351 JG Almere









