Our benefits for you

Go to homepage

Product information "VICTRON SmartSolar MPPT 100/50 Solar Charge Controller"

Order number: 80015946
Manufacturer No.: SCC110050210
Shipping method: Standard package

SmartSolar MPPT Charge Controller with Bluetooth

  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point detection in partial shading
  • Excellent efficiency
  • Natural convection cooling
  • Automatic battery voltage detection
  • Flexible charge algorithms
  • Overheating protection and load reduction at high temperatures
  • Built-in Bluetooth - the wireless solution for setup, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices
  • Battery voltage: 12/24 V (automatic selection)
  • Rated charge current: 50 A
  • Nominal PV power, 12 V: 700 W
  • Nominal PV power, 24 V: 1400 W
  • Maximum PV open-circuit voltage: 100 V
  • Max. short-circuit current of the solar array: 60 A
  • Max. efficiency: 98 %
  • Self-consumption 12 V: 30 mA
  • Self-consumption 24 V: 20 mA
  • “Absorption” charge voltage default settings: 14.4 V / 28.8 V (adjustable)
  • “Float” charge voltage default settings: 13.8 V / 27.6 V (adjustable)
  • Charge algorithm: multi-stage, adaptive
  • Temperature compensation: -16 mV/°C or -32 mV/°C
  • Protection: PV reverse polarity / output short circuit / overheating
  • Operating temperature: -30 °C to +60 °C (full rated output up to 40 °C)
  • Humidity: 95 % (non-condensing)
  • Data communication port: VE.Direct
  • Power connections: 16 mm²/AWG6
  • Protection class: (electronic components) IP43 / IP22 (connection area)

A solar charger draws energy from solar modules and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximises this energy harvesting and intelligently directs it to fully charge the batteries in the shortest possible time. The SmartSolar maintains battery health and extends its service life.

The SmartSolar charge controller even recharges a heavily discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra-fast Maximum Power Point Tracking

By continuously monitoring the voltage and current output of your solar (PV) modules, MPPT technology ensures that all available energy is drawn from the modules and stored. This benefit is most noticeable when the sky is partially covered and light intensity is constantly changing.

Remote monitoring and control

You can remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the Victron Remote Management Internet portal (VRM) via a GX device, you have full access to your MPPT at any time and from anywhere. Both VictronConnect and VRM are available free of charge. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting it to the GlobalLink 520.

Load output

The 'Intelligent Load Output' function prevents damage caused by using 'flat' batteries. You can configure the voltage at which the SmartSolar disconnects a load - this prevents excessive discharge of your batteries. And here's the clever part: every day, the SmartSolar tries to recharge the battery to 100%. If this is not possible - for example, in bad weather - it raises the disconnect voltage daily until it succeeds. We call this function BatteryLife, because it maintains battery health and extends your battery's service life.

Breite (cm): 18,6
Gewicht (kg): 1,3
Höhe (cm): 13
Tiefe (cm): 7
Leistung: 700 W
Marke: VICTRON ENERGY
Schutzklasse: 43
VICTRON ENERGY

Victron Energy B.V.

De Paal 35
NL-1351 JG Almere

Niederlande