Our benefits for you

Go to homepage

Product information "SIKA Cavity Protection SikaGard - 6220 S Amber 500 ml"

Order number: 80007662
Manufacturer No.: 440222
Shipping method: Standard package

Sikagard®-6220 S is an amber-coloured, durable wax in a spray can with outstanding rust protection properties. The product is specially designed for effective protection against corrosion in vehicle cavities, and offers outstanding application characteristics and high performance in use. Its excellent penetration behaviour also provides perfect protection for hard-to-reach areas. After drying, a brown, slightly tacky wax layer remains, which protects the cavities against corrosion.

  • No special application equipment required
  • Very good creep behaviour for easy application even at low temperatures
  • Outstanding film-forming properties
  • Very good water repellency
  • Good low-temperature performance
  • Heat resistant
  • Permanently elastic
  • High resistance to road salt
  • Chemical base: wax solution
  • Curing mechanism: air drying
  • Density before curing: 0.66 kg/l
  • Solids content (CQP002-1): 30 %
  • Application temperature: 15 to 75 °C
  • Film thickness: wet 100 µm, dry 30 µm
  • Flash-off time: 2 h
  • Service temperature: -50 to 75 °C

Application

Sikagard®-6220 S is a sprayable corrosion protection coating for the repair and protection of hidden areas on vehicles, such as cavities in vehicle doors, side panels, bonnets, boots, wings, sills and A-, B- and C-pillars. The product penetrates the finest hairline cracks but does not run out of drainage openings. Sikagard®-6220 S shows very good adhesion to various paints, primers, metals and PVC without pre-treatment. This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.

Surface preparation

The substrate must be clean, dry and free from rust, dust and grease. Bare metal must be pre-treated to enhance corrosion protection (e.g. bare steel, etc.).

Application instructions

Shake the can vigorously approximately 40 times before use. Mask off adjacent surfaces before spraying. Hold the spray can upright and spray Sikagard®-6220 S onto the surface or into the cavity at room temperature from a distance of approximately 25 cm. To reach cavities effectively, use the additional spray button with flexible nozzle. Existing or newly drilled access points in the bodywork can be used for this. Spray in even coats.
Do not spray onto parts of the brakes, engine or exhaust system.
After application, hold the spray can upside down and spray at short intervals to clean the nozzle.
Because of the flammable propellant, the cavities must be ventilated during drying or before closing.

Removal

Uncured Sikagard®-6220 S can be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Cured material can only be removed mechanically. Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Handclean) or industrial hand cleaners and water. Do not use solvents on the skin!

Overpaintability

Sikagard®-6220 S cannot be overpainted.

Hazard statements:

H222: Extremely flammable aerosol.
H229: Pressurised container: may burst if heated.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.

Farbe: Gold
Marke: SIKA
Volumen (L): 0,5
SIKA

Sika Deutschland GmbH

Kornwestheimer Straße 103-107
70439 Stuttgart

Deutschland

info@de.sika.com