SIKA Replacement Nozzle Standard Version 12-Piece Set

€13.95
Auf Lager, Lieferzeit: 2 - 3 Werktage
SIKA Adhesive and Sealant Sikaflex - 522 White 300 ml €11.95 €13.95 verfügbar
SIKA Adhesive and Sealant Sikaflex - 522 Grey 300 ml €13.95 verfügbar
SIKA Adhesive and Sealant Sikaflex - 522 Black 300 ml €11.95 €13.95 verfügbar
SIKA Adhesive and Sealant Sikaflex - 522 White 100 ml €10.95 €11.50 verfügbar Sikaflex®-522 is a low-emission, one-component STP adhesive and sealant. The product offers good weather resistance and mould resistance. Sikaflex®-522 meets the highest EHS requirements. With minimal pre-treatment, Sikaflex®-522 shows good adhesion to a wide range of substrates.
Sikaflex®-522 shows good adhesion to a wide range of substrates and is suitable for elastic sealing and bonding applications indoors and outdoors. This product is suitable for air-conditioning and ventilation applications as well as for food-processing facilities.
Suitable substrates include wood, glass, metals, metal primers and paints (two-component systems), ceramic materials and plastics.
Observe the manufacturer's recommendations before using Sikaflex®-522 on materials at risk of stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.
Sikaflex®-522 can be processed between 5 °C and 40 °C (changes in reactivity must be taken into account). The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Note the increase in viscosity at cool temperatures. For easy processing, warm the adhesive to room temperature.
Apply Sikaflex®-522 with a suitable cartridge/foil pack gun or pump system. Skin formation time is significantly shorter in hot and humid climates.
Smoothing must be carried out before the sealant forms a skin. For smoothing, we recommend Sika® Smoothing Agent N. Other smoothing agents must be checked for suitability.
Uncured Sikaflex®-522 can be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Cured material can only be removed mechanically. Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Handclean) or industrial hand cleaners and water. Do not use solvents on the skin!
Sikaflex®-522 is best overpainted within the skin formation time. If the painting process takes place after skin formation, adhesion can be improved by pre-treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting. If the paint requires a stoving process (above 80 °C), the best result is achieved if the sealant has fully cured beforehand. Paint compatibility must be checked by preliminary tests under production conditions. As the elasticity of paints is lower than that of the sealant, paint cracks may occur in the joint area.
H226: Flammable liquid and vapour.
H301: Toxic if swallowed.
H311: Toxic in contact with skin.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H330: Fatal if inhaled.
H332: Harmful if inhaled.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.
H413: May cause long lasting harmful effects to aquatic life.
| Farbe: | Grau |
|---|---|
| Marke: | SIKA |
| Volumen (L): | 0,3 |

Sika Deutschland GmbH
Kornwestheimer Straße 103-107
70439 Stuttgart