Unsere Vorteile für Sie

Zur Startseite gehen

Produktinformationen "SIKA Adhesive and Sealant Sikaflex - 522 White 300 ml"

Order number: 48284007
Hersteller-Nr.: 634863
Versandart: Standardpaket

Sikaflex®-522 is a low-emission, one-component STP adhesive and sealant. The product offers good weather resistance and mould resistance. Sikaflex®-522 meets the highest EHS requirements. Sikaflex®-522 demonstrates good adhesion to a wide range of substrates with minimal pre-treatment.

  • High resistance to ageing and weathering
  • Good resistance to mould
  • Particularly low-emission and low-odour
  • Good adhesion to a wide range of substrates without the need for special pre-treatment.
  • Good colour stability under UV exposure
  • Free from isocyanate, solvents and phthalates
  • Meets the hygiene requirements for air-conditioning and ventilation systems in accordance with VDI 6022, Sheet 1:2011-09
  • ISEGA certificate for use in the food sector
  • suitable for:
  • Exterior joints
  • Penetrations
  • Windows
  • Dampers
  • Kitchen
  • Sanitary areas
  • Technical data:
  • Chemical base: Silane-terminated polymer (STP)
  • Curing mechanism: Moisture-curing
  • Density before curing: 1.4 kg/l
  • Sag resistance: Good
  • Processing temperature: 5 to 40 °C
  • Skin formation time: 30 minutes
  • Volume change: -2 %
  • Shore A hardness (CQP023-1 / ISO 7619-1): 40
  • Tensile strength (CQP036-1 / ISO 527): 1.8 MPa
  • Elongation at break (CQP036-1 / ISO 527): 400 %
  • Tear resistance (CQP045-1 / ISO 34): 7.5 N/mm
  • Service temperature (CQP513-1): -50 to 90 °C

Application:

Sikaflex®-522 demonstrates good adhesion to a wide range of substrates and is suitable for elastic sealing and bonding applications indoors and outdoors. This product is suitable for applications in air-conditioning and ventilation systems, as well as for food-processing facilities.
Suitable substrates include wood, glass, metals, metal primers and coatings (two-component systems), ceramic materials and plastics.
Observe the manufacturer's recommendations before using Sikaflex®-522 on materials prone to stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracks. This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the relevant conditions.

Processing:

Sikaflex®-522 can be processed at temperatures between 5 °C and 40 °C (changes in reactivity must be taken into account). The optimum temperature for the substrate and sealant is between 15 °C and 25 °C.
Note the increase in viscosity at low temperatures. For ease of application, warm the adhesive to room temperature.
Apply Sikaflex®-522 with a suitable cartridge/foil-pack gun or pump system. Skin formation time is significantly shorter in hot and humid climates.

Tooling:

Tooling must be carried out before the sealant forms a skin. For tooling, we recommend Sika® Tooling Agent N. Other tooling agents must be tested for suitability.

Removal:

Uncured Sikaflex®-522 can be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Cured material can only be removed mechanically. Hands/skin must be washed immediately with suitable cleaning wipes (e.g. Sika® Handclean) or industrial hand cleaners and water. Do not use solvents on the skin!

Overpaintability:

Sikaflex®-522 is best overpainted within the skin formation time. If painting is carried out after skin formation, adhesion can be improved by pre-treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 before painting. If the paint requires a stoving process (over 80 °C), the best result is achieved if the sealant has been fully cured beforehand. Paint compatibility must be tested by preliminary trials under production conditions. As the elasticity of paints is lower than that of the sealant, paint cracks may occur in the joint area.

Hazard statements:

H226: Flammable liquid and vapour.
H301: Toxic if swallowed.
H311: Toxic in contact with skin.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H330: Fatal if inhaled.
H332: Harmful if inhaled.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.
H413: May cause long lasting harmful effects to aquatic life.

Farbe: Weiß
Marke: SIKA
Volumen (L): 0,3
SIKA

Sika Deutschland GmbH

Kornwestheimer Straße 103-107
70439 Stuttgart

Deutschland

info@de.sika.com