ProPlus Triangular Pyramid Spirit Level with 2 Vials

€124.90*
UVP €159.00* (21% gespart)Nur noch 1 auf Lager, Lieferzeit: 2 - 3 Werktage
The moment you arrive on a campsite, the drama usually begins: propping up – jacking up – stabilising with levelling ramps, support systems or corner steadies. One person guides you in, another drives on – and in the end you are still always half a centimetre short of allowing water to drain from the sink and shower. That no longer has to be the case! We are putting an end to camping frustration – with the powerful camper 2.0 tyre air cushion! With it, you can effortlessly lift vehicles weighing up to 6 tonnes by up to 20 centimetres.
A foot pump or a mini compressor is all you need for inflation. Before use, please remove any sharp objects or stones from the ground or use a mat to protect the tyre air cushion. In strong sunlight, the cushions should be covered.
All flat-jack® tyre air cushions have a double-walled structure. The inner membranes provide maximum airtightness, while the outer casing is responsible for durability and shape retention.
Differently sized chambers ensure optimum adaptation to virtually any tyre contour. The camper version has an internal construction specially designed for heavy vehicles (campervans, caravans). Motorhomes can therefore be entered with ease when the tyre cushions are placed underneath.
Before use, remove sharp objects/stones from the ground and/or use a suitable mat.
Inflate only under load.
Do not drive over the valves.
Apply the handbrake.
Engage a gear or set the automatic selector lever to P.
Then inflate at the filling valve (in). Do not continue inflating once the vehicle stops rising.
Before driving off, deflate the flat-jack at the release valve (out).
Cover in strong sunlight.
| Höhe (cm): | bis 20 |
|---|---|
| Lieferumfang: | 1 Stück |
| Made in: | Germany |
| Marke: | FLAT-JACK |

flat-jack products GmbH
Leonhard-Strell-Str. 3-5
85540 Haar