Our benefits for you

Go to homepage

Product information "FLAT-JACK Lifting Cushions flat-jack camper Levelling Cushions"

Order number: 80015402
Manufacturer No.: 1000508
Shipping method: Standard package

No sooner have you arrived at the campsite than the drama usually begins: supporting – jacking up – stabilising with levelling wedges, support systems or corner steadies. One person guides, another drives on – and yet, in the end, you're always half a centimetre short of getting the water to drain from the sink and shower. That no longer has to be the case! We're putting an end to camping frustration – with the powerful camper tyre air cushion! It lets you effortlessly lift vehicles weighing up to 6 tonnes by up to 6 centimetres.

  • takes the strain off the chassis during long periods of standing
  • ultra-light and space-saving
  • can be used for levelling on uneven ground
  • is inflated with a foot pump or mini compressor (not included)
  • Load capacity: suitable for vehicles up to 6 t (double-walled, high-frequency welded)
  • Made in Germany
  • Technical data:
  • Operating pressure: 0.6 - 1.2 bar
  • Maximum pressure: 1.2 bar
  • Load capacity: 6 t
  • Inner material: PU membrane
  • Outer material: PU/nylon fabric-reinforced
  • for tyre widths up to 255 mm
  • Levelling height: up to 6 cm (levelling height depends on weight)

A foot pump or mini compressor is all you need to inflate it. Before use, please clear the ground of sharp objects or stones, or use a protective mat to protect the tyre air cushion. In strong sunlight, the cushions should be covered.

Patented membrane and chamber design

All flat-jack® tyre air cushions have a double-walled structure. The inner membranes provide maximum airtightness, while the outer casing is responsible for durability and shape retention.
Differently sized chambers ensure optimum adaptation to virtually any tyre contour. The camper version features an internal construction specially designed for heavy vehicles (campervans, caravans). This means motorhomes can be entered with ease when the tyre cushions are placed underneath.

Please note:

Before use, clear the ground of sharp objects/stones and/or use a suitable mat.
Inflate only under load.
Do not drive over the valves.
Apply the handbrake.
Engage a gear or set the automatic selector to P.
Then inflate at the inlet valve (in). Do not inflate further once the vehicle stops rising.
Before driving off, deflate the flat-jack at the outlet valve (out).
Cover in strong sunlight.

Höhe (cm): bis 6
Lieferumfang: 1 Stück
Made in: Germany
Marke: FLAT-JACK
FLAT-JACK

flat-jack products GmbH

Leonhard-Strell-Str. 3-5
85540 Haar

Deutschland

info@flat-jack.de