PEGGY PEG Anchor Plate 1.0 Set of 2
€18.50*
UVP €18.94* (2% gespart)Lieferzeit: 2 - 4 Werktage
Produktinformationen "PEGGY PEG Anchor Plate 1.0 Set of 2"
The universal mounting plate for common awnings and all standard tent poles, helping to prevent sinking into the ground, among other things.
- Anchoring for storm straps and guy lines.
- For upright poles on touring and winter awnings.
- Can be used with (almost) all screw-in pegs.
- The product consists of:
- 2 x Blue Anchor Plates
- 2 x Orange Uni Plates
- 2 x Storm Hooks
- Technical information:
- Material: PA with fibreglass (plate), steel (hook)
- Length: 20 cm
Load distribution!
The Peggy Peg product range is designed to be highly efficient and straightforward. Many products have more than one use. The Anchor Plate is no exception. With the included storm hook (steel), it is an excellent anchor for storm straps and guy lines. Up to 6 screw-in pegs with a length of 20 cm can anchor the plate in the ground. If a screw hits an obstacle, the flat hook can also be used for fixing by sliding it into the height adjustment. Alternatively, the newly developed Peg&Stop screws can also be used with this plate. Upright poles for touring and winter awnings can be secured between the two plates. This means the foot can neither sink downwards into soft ground nor slide sideways, while the awning's bead is kept under pressure and therefore held securely in position.
Please note:
The Hardcore Peggy (impact screw-in peg) unfortunately does not fit through the holes in this plate, as it was developed years later. If required, use the Fix&Go Anchor Plate 2.0. This can also be used with storm hooks, and the HC Peggy will fit too.
| Gewicht (kg): | 0,37 |
|---|---|
| Länge (cm) : | 20 |
| Marke: | PEGGY PEG |
| Material: | PA mit Glasfaser (Platte), Stahl (Haken) |
| Packmaß: | 12,1x20,1x3,6cm |

Peggy Peg Innovative Systems GmbH
Kulbacher Straße 53a
95512 Neudrossenfeld
support@peggypeg.net














