Our benefits for you

Go to homepage

Product information "SAWIKO AREX LIGHT II Crank Support Jack, double telescopic, 310-510 mm"

Order number: 80010290
Manufacturer No.: 1629789
Shipping method: Standard package

Suitable for almost all common motorhomes.

  • Striking looks
  • Double telescopic, from 310 - 510 mm
  • Low weight of just 2.2 kg per support
  • Made from aluminium and plastic
  • Easy to fit
  • Special dirt-repellent protective cap
  • Working stroke 220 mm
  • Load capacity 500 kg

The AREX Light II support really stands out for how easy it is to use. The support set is made almost entirely from plastic and weighs just approx. 2.2 kg per support, yet offers a load capacity of 500 kg. That means a weight saving of up to 50% compared with steel supports. Naturally, the AREX Light II plastic support gives you a completely secure stand, guaranteed by an aluminium vehicle mounting and a hardened, galvanised steel spindle. The AREX Light II is therefore the most convenient way to support your vehicle safely.

The support is incredibly easy to handle. Simply wind it down until it extends telescopically of its own accord. Then just keep winding until it stands firm - done.

Where is the best place to fit the AREX Light support?

In principle, the best effect is achieved when the crank support is fitted as far out on the motorhome as possible. However, as a stable mounting point is rarely available there, fitting it to the chassis is advisable. Even though the support is not quite as easy to reach here, mounting it on the chassis offers a good combination: the vehicle is well stabilised and the secure mounting means no damage is caused.

Where should the crank support never be fitted?

As high forces act on the mounting point, there are some unsuitable fixing points for the supports. For example, neither the garage floor nor non-load-bearing chassis extensions are suitable for mounting the AREX Light support.

Gewicht (kg): 4,4
Farbe: Schwarz
Lieferumfang: 2 AREX-Light Stützen, 1 Kurbel 880 mm Länge, Montagematerial
Marke: Sawiko
SAWIKO

Alois Kober GmbH
Niederlassung SAWIKO
Ichenhauser Str. 14
89359 Kötz

Deutschland

info@sawiko.com