SIKA Wool Felt Applicator for Sika Primer 24 pcs
Inhalt: 0.25 Liter (€71.20 / 1 Liter)

€50.56*
UVP €58.95* (14% gespart)Lieferzeit: 2 - 4 Werktage
Pigmented primer for many substrates (Purform® technology)
Sika® Primer-507 is based on Purform® technology. Purform® technology enables high-performance polyurethane products with less than 0.1% monomeric diisocyanate for improved health and safety at work.
Sika® Primer-507 is a solvent-based black primer that reacts with moisture to form a thin film. This film acts as a bonding layer between the substrate and the adhesive.
Sika® Primer-507 has been specially developed for pre-treating bonding surfaces in combination with Sika's elastic adhesives and sealants. This primer also provides excellent adhesion on many substrates without the prior use of Sika® Activator.
Sika® Primer-507 fluoresces for a limited period under long-wave UV light. This property is used for process control.
Sika® Primer-507 is used to improve adhesion on a wide variety of different substrates such as glass, ceramic-coated glass, plastics, primers, painted surfaces, cathodic dip coating (KTL) and metals.
Observe the manufacturer's recommendations before using Sika® Primer-507 on materials susceptible to stress cracking.
This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.
The bonding surfaces must be clean, dry and free from grease, oil, dust and contaminants.
Adhesion can be improved by additional pre-treatment steps before applying the primer, such as sanding, cleaning and activating.
Shake Sika® Primer-507 very well until the steel balls in the container can be clearly heard. Then continue shaking for one more minute. Application can be carried out with a brush, felt or foam applicator. Apply Sika® Primer-507 evenly in a thin but fully covering coat. The optimum application and surface temperature is between 15 °C and 25 °C.
Apply the primer only once. Make sure that the single application provides sufficient coverage.
Consumption and method of application depend on the condition of the substrates.
Close the container tightly immediately after each use.
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H317: May cause an allergic skin reaction.
H336: May cause drowsiness or dizziness.
| Farbe: | Schwarz |
|---|---|
| Marke: | SIKA |
| Volumen (L): | 0,25 |

Sika Deutschland GmbH
Kornwestheimer Straße 103-107
70439 Stuttgart